| |
| |
|
|
|
Location: Home / Product Bubbler |
|
|
Bubble Humidifier
 |
|
View Brochure (631KB PDF)
|
|
Product Overview
|
+Wide dynamic range of gas flows from 0 to 10 slpm
+For your safety, we include redundant system protection on each humidification channel: over-temperature cutoff, over-pressure cutoff, and a rupture disk for added safety!
+Humidifier can be operated as a stand-alone unit or controlled with Fideris FCPower software
+The humidifier can be combined with additional Fideris components as well as third-party equipment to achieve a fully-integrated, fully-automated, customized system
+Independent dew point temperature control of two humidification channels
+Independent headspace temperature control of the two humidification channels, which assures full humidification of small gas flows (those less than 2 slpm)
+Independent temperature control of optional heated gas transfer lines
+Front panel display of temperatures
+Up to 1800 Watts per channel heating capacity
+Automatic water refill
+Connect directly to house deionized water supply or order with internal water pressurization system
+Water handling system designed for use with deionized water
+System designed for reactant gas pressures up to 50 psig
+Designed for ease of diagnostics and maintenance
+Integrated hardwired Run/Standby signal
|
|
Specifications
|
|
Specifications of the Bubble Humidifier
|
|
|
Humidifiers: |
Evaporators equipped with temperature controlled heaters and gas diffusers |
|
|
Evaporator Outlet Pressure: |
50 psi maximum |
|
|
Headspace Heaters: |
100 Watt temperature-controlled heaters |
|
|
Reactant Gas Flow Range: |
0-10 slpm |
|
|
Range of Temperature Control: |
Ambient to 115 degrees Celsius (239 degrees Fahrenheit) |
|
|
Over-Pressure Relief Valve: |
75 psi |
|
|
Over-Temperature Cutoff: |
120 degrees Celsius (248 degrees Fahrenheit). 140 degrees Celsius (284 degrees Fahrenheit) high-temperature option |
|
|
Rupture Disk: |
100 psi |
|
Electrical Requirements
|
|
|
Voltage: |
115 or 230 VAC as specified |
|
|
Frequency: |
50/60 Hz |
|
|
Current Rating: |
20 Amps at 115 VAC, 16 Amps at 230 VAC |
|
Front Panel Controls and Displays
|
|
|
Gas Humidifier Evaporator Controller: |
4-digit LED display |
|
|
Gas Humidifier Dew Point Controller: |
4-digit LED display |
|
|
Gas Transfer Line Temperature Controller: |
4-digit LED display |
|
|
Channel Inlets: |
1/4" Swagelok |
|
|
Channel Outlets: |
3/8" Swagelok |
|
|
Fuel and Oxidant Humidifier Drain Lines: |
1/4" Swagelok |
|
|
Transfer Line Temperature Inputs: |
Mini-type K |
|
|
Transfer Line Switched Receptacles |
IEC-320 C13 outputs operating at same line voltage as the unit, 2 Amps each receptacle |
|
Back Panel Connections
|
|
|
Power Inlet: |
IEC-320 C20 (mating cord provided) |
|
|
Overpressure Discharge: |
1/4" Swagelok |
|
|
Data Connection: |
RS-232 DB9 |
|
|
Run/Standby: |
Molex 39660-1004 |
|
Physical Characteristics
|
|
|
Dimensions: |
27.5" D x 21.5" H x 10" W |
|
|
System Weight: |
97-103 lbs, depending on options |
|
|
Operating Environment: |
40F to 100F; 85% RH
|
|
|
Cabinet Location: |
Indoors |
|
|
Clearance for Operation: |
Back: 6", RH: 2", LH: 4", Top: 0" |
|
|
Water Reservoir Capacity: |
4.7 liters (optional) |
|
|
|
|
|
|
News:
Fideris Brand Testing Equipment is Now Available Through the Fuel Cell Store Website
. The Fuel Cell Store is now a distributor for the Fideris Brand of testing and laboratory automation equipment. This Partnership is the first to offer the industry component selection with on-line pricing, allowing customers to tailor their equipment to match their requirements; creating a plug-and-play, turn-key fuel cell test system.
|
|
|
|
|
|
|
|
|
|
|
|
| Copyright ©2010 Fideris Brand Test and Automation Equipment |
|
|
home
| contact
| support
| sales
| faqs
products
| company information
| site map
Tes Sol, Inc. | 1315 SE Grace Ave, Ste 130 | Battle Ground, WA 98604 USA
Phone: (360) 687-1393, Fax: (360) 687-8251
Need
help? Contact
our webmaster.