|
Specifications of the Dual-Channel 150 Watt Electronic Load Module
|
|
|
Type: |
MOSFET variable resistance loadbank |
|
|
Current Measurement: |
Exchangeable shunt (determines maximum current). 1A, 2A, 5A, 10A, 20A, or 50A shunts available |
|
|
Maximum Current Rating: |
50A. Higher current version available |
|
|
Maximum Voltage Rating: |
20V standard, 55V available |
|
|
Maximum Power Dissipation: |
150W |
|
|
Nominal Short Circuit Resistance: |
< 3 milliohms standard; lower resistance available |
|
|
Corrosion Protection: |
All critical components gold-plated |
|
|
Voltage Measurement Precision: |
16 bit precision of full scale measurement |
|
|
Current Measurement Precision: |
16 bit precision of full scale measurement |
|
Electrical Requirements
|
|
|
Voltage: |
26-50VDC |
|
|
Communication: |
Ethernet (DHCP) |
|
Front Panel Controls and Displays
|
|
|
Unit Status: |
LCD with backlight, current, and voltage |
|
|
Communications: |
Tx, Rx, Ident LEDs |
|
|
Enabled/Standby Status: |
Enabled LED |
|
Back Panel Connections
|
|
|
Power / Run/Standby |
Molex 39660-1004 |
|
|
Data Connections: |
RJ45 (8P8C) Ethernet |
|
|
Cell Voltage Input (optional): |
DB-25, available as an option |
|
|
Reference Voltage Input: |
4 pin AMP CPC |
|
|
Load Connections: |
5/16" bolt down terminals standard |
|
Physical Characteristics
|
|
|
Dimensions: |
3.5" high (2U)
19" rackmount; 21" deep |
|
|
System Weight: |
Dependent on configuration, approximately 30 lbs |
|
|
Operating Environment: |
40 to 100 degrees Fahrenheit, 85% RH |
|
|
Cabinet Rating: |
Indoors |
|
|
Clearance for Operation: |
Back: 8", Sides: 0", Top: 0" |