| |
| |
|
|
|
Location: Home / Dual-Channel Output Gas Delivery Module |
|
|
Innovator Series Dual-Innovator Output Gas Delivery Module
 |
|
View Brochure (557KB PDF)
|
|
Product Overview
|
+Separate inlets, mass flow controllers, and outlets of two distinct gases
+Flow rates up to 2500 SLPM per gas
+All-digital control eliminates analog calibration requirements and inaccuracies
+Ethernet Interface for simple configuration and expansion!
+The output from multiple Gas Delivery Modules may be combined to provide dynamically controlled gas flow rates and compositions, including Stoichiometric control
+System-wide control of all Fideris Test System Components using FCPower Software, Labview, or other programming language
+Integrated hardwired Run/Standby signal
+Power Over Ethernet (PoE) for redundant power
+Front panel LED status of Ethernet communications, inlet gas pressure, gas enabled, and power
+Pressure regulator on inlet gas line to provide the highest degree of accuracy, and check valves for gas backflow prevention
|
|
Specifications
|
|
Specifications of the Gas Delivery Module
|
|
|
Gas Control: |
Dual mass flow control of gas delivery |
|
|
Gas Inlet Valves: |
Solenoid or pneumatically operated bubble tight valve |
|
|
Maximum Inlet Gas Pressure: |
125 PSI (8.62 Bar) |
|
|
Mass Flow Controller Brands: |
All digitally controlled brands available including Alicat, Bronkhorst, Brooks, MKS, or Sierra |
|
Electrical Requirements
|
|
|
Voltage: |
26-50VDC |
|
|
Communication: |
Ethernet (DHCP) |
|
Front Panel Controls and Displays
|
|
|
Unit Status: |
LCD with backlight, flow setpoint, and actual flow |
|
|
Communications: |
Tx, Rx, Ident LEDs |
|
|
Inlet Pressure Status: |
LED illuminates above threshold pressure |
|
|
Enabled / Standby Status: |
Enabled LED |
|
|
Supply Pressure Gauge: |
1 1/2" (optional) |
|
Back Panel Connections
|
|
|
Power / Run/Standby: |
Molex 39660-1004 |
|
|
Communications: |
RJ45 (8P8C) Ethernet |
|
|
Supply Connection: |
Swagelok bulkhead union or optional quick-connect. 1/4" on 1U modules, 1/4" or 3/8" on 2U modules, 1/2" or 3/4" on 3U modules. VCR on optional UHP (Ultra-High Purity) models |
|
|
Outlet Connection: |
Swagelok bulkhead union or optional quick-connect. 1/4" on 1U modules, 1/4" or 3/8" on 2U modules, 1/2" or 3/4" on 3U modules. VCR on optional UHP models |
|
Physical Characteristics
|
|
|
Dimensions: |
1U Modules: 1.75", 2U Modules: 3.5", 3U Modules: 5.25"
19" rackmount; 21" deep |
|
|
System Weight: |
Dependent on configuration, approximately 15 lbs for 1U |
|
|
Operating Environment: |
40F to 100F; 85% RH
|
|
|
Cabinet Location: |
Indoors |
|
|
Clearance for Operation: |
Back: 6", Sides: 0", Top: 0" |
|
|
Optional UHP Module Materials and Finish: |
316L (VAR if a welded component). Surface finish 10 micro-inch Ra |
|
|
|
|
|
|
|
|
| Copyright ©2012 Fideris Brand Test and Automation Equipment |
|
|
home
| contact
| support
| sales
| faqs
products
| company information
| site map
Tes Sol, Inc. | 1315 SE Grace Ave, Ste 130 | Battle Ground, WA 98604 USA
Phone: (360) 687-1393, Fax: (360) 687-8251
Need
help? Contact
our webmaster.