TesSol, Incorporated | Product Electronic Loadbank

Innovator Series Electronic Loadbank

View Brochure (488KB PDF)

Product Overview

+Fully Programmable, self-contained, air cooled Solid State Load
+Patented Design is Optimized to Provide Ultra-Low Impedance Operation for Fuel Cell Testing
+Load is compatible with AC Impedance or Frequency Response Analyzers
+Short circuit resistance below 0.5 milliohms on the 500 W and 1 kW models
+Interchangeable shunts for precise operation over a wide dynamic range
+Ten voltage monitoring inputs standard. Additional voltage monitoring inputs available
+Ethernet Interface for simple configuration and expansion!
+System Wide Control of all Fideris Test System Components using FCPower Software
+Integrated hardwired emergency stop
+Power Over Ethernet (PoE) for redundant power

Specifications

*Specifications of the Electronic Load Module*
	Type:	MOSFET variable resistance loadbank
	Current Measurement:	Exchangeable shunt (from 1A to 1000A available depending on load model)
	Maximum Current Rating:	50, 100, or 1000 Amps depending on load model
	Maximum Voltage Rating:	20V standard, 55V available
	Maximum Power Dissipation:	150, 250, 500, or 1kW models available
	Nominal Short Circuit Resistance:	150W<2m, 250W<2m, 500W<0.5m, 1kW<0.5m
	Load Capacitance:	< 25 pF
	Corrosion Protection:	All critical components gold-plated
*Electrical Requirements*
	Voltage:	26-50VDC
	Communication:	Ethernet
*Back Panel Connections*
	Power/Estop	Molex 39660-1004
	Data Connections:	Ethernet
	Cell Voltage Input:	16 pin AMP cpc
	Reference Voltage Input:	4 pin AMP CPC
	Load Connections:	5/16" bolt down terminals standard
*Physical Characteristics*
	Dimensions:	150W, 250W, 500W 2U (3.5"), 1000W 3U (5.25") 19" rackmount; 21" deep
	System Weight:	Dependent on configuration. Approx 30lbs
	Operating Environment:	40 to 100 Fahrenheit, 85% RH
	Cabinet Rating:	Indoor
	Clearance for Operation:	Back: 8", Sides: 0", Top: 0"