| |
| |
|
|
|
Location: Home / Product Gas Handling |
|
|
Gas Handling Details
Note: This unit was manufactured from 1998 through 2007 and is no longer in production.
Please refer to the Innovator Series Gas delivery for current equipment.
Information is provided for reference only
|
|
|
|
|
|
[Product Overview]
[Description]
[Specifications]
[Software]
[Photographs]
|
|
Product Overview
|
+Independent mass flow control of up to four fuel gases and two oxidant gases (one fuel gas and two oxidant gases standard)
+Individual pressure regulators on each input gas line allows the use of either dedicated gas cylinders or multi-user, high pressure gas lines
+Pressure gauges for regulated gas pressure monitoring and adjustment
+Adjustable exit gas pressure control and monitoring
+Exhaust gas aftercoolers are available for SOFC applications
+Check valves on inlet gas lines to prevent gas backflow into gas source lines
+Water knockout from fuel cell exit gases
+All gas lines are made of seamless 316 stainless steel tubing
+3/8 tubing for high gas flows
+Backpanel access to static pressure ports allows user configuration of pressure monitoring points
+Fail safe purge of fuel system
+Panic button for emergency shutdown
+Ambient combustible and toxic gas detectors
+Optional differential gas pressure display and data acquisition to measure pressure drop across fuel cell
+System wide control of all FiderisTM FCTS equipment using FCPowerTM Software (FCPowerTM Software is included) |
|
Description
|
The FiderisTM gas handling system allows stochiometric control of reactant gases when used with the electronic loadbank. The user may adjust the exit gas pressure regulators to provide uniform back pressure to the fuel cell. In addition, this system has independent mass flow control of up to four fuel gases and two oxidant gases. |
|
Specifications
|
|
Gas Handling
|
|
|
Reactant Gas Control:
|
Individual mass flow control for up to four fuel gases and two oxidant gases
|
|
|
Range of Gas Flow:
|
1-10 lpm or 0-100 lpm standard
|
|
|
Maximum Inlet Gas Pressure:
|
250 psi
|
|
Back Panel Connections
|
|
|
Power Inlet:
|
IEC-320 (mating cord provided)
|
|
|
Gas Inlets:
|
1/4" Swagelok for oxidant, fuel, and purge gases
|
|
|
Gas Outlets:
|
3/8" Swagelok
|
|
|
Static Ports:
|
1/8" Swagelok
|
|
|
Fuel Vent Stem:
|
1/8" Swagelok
|
|
|
Water Drains:
|
1/8" Swagelok
|
|
|
Data Connection:
|
RS485 DB9
|
|
Electrical Requirements
|
|
|
Voltage:
|
120 VAC (208/220/240 optional)
|
|
|
Frequency:
|
60 Hz (50 Hz optional)
|
|
|
Current:
|
6 Amps @ 120V
|
|
Installation Requirements
|
|
|
Clearance for Operation:
|
Back: 6, RH: 2, LH: 2, Top: 0
|
|
Physical Characteristics
|
|
|
Dimensions:
|
24.25 high; 22 wide; 27.5 deep
|
|
|
System Weight:
|
120 lbs.
|
|
|
Operating Environment:
|
40 to 100 Fahrenheit, 85% RH
|
|
|
Cabinet Rating:
|
Indoor |
|
|
Software
|
Fideris
FCPower
TM
software. |
|
Photographs
|
|
|
|
|
|
News:
TesSol, Inc, Announces Their Innovator Series Equipment Platform
. Superior design and testing flexibility.
|
|
|
|
|
|
|
|
|
|
|
|
| Copyright ©2008 TesSol, Incorporated |
|
|
home
| contact
| support
| sales
| faqs
products
| company information
| site map
Tes Sol, Inc. | 1315 SE Grace Ave, Ste 130 | Battle Ground, WA 98604 USA
Phone: (360) 687-1393, Fax: (360) 687-8251
Need
help? Contact
our webmaster.