|
|
|
Location: Home / Product Liquid Delivery Module |
|
|
Innovator Series Liquid Delivery Modules
 |
|
View Brochure (585KB PDF)
|
|
Standard Features
|
+Mix and Match modules to deliver various flow rates and liquids. Gas delivery modules are also available
+Flow rates are controlled by liquid mass flow controllers, peristaltic metering, positive displacement diaphragm, or piston metering pumps
+Ethernet Interface for simple configuration and expansion!
+The output from multiple Liquid Delivery Modules may be combined to provide dynamically controlled gas flow rates and compositions, including Stoichiometric control
+System-wide control of all FiderisTest System components using FCPower Software, Labview, or other programming language
+Integrated hardwired Run/Standby signal
+Power Over Ethernet (PoE) for redundant power
+Front panel LED status of Ethernet communications, inlet liquid pressure, liquid enabled, and power
+Pressure regulator on inlet liquid lines to provide the highest degree of accuracy, and check valves for liquid backflow prevention
|
|
Modules Available
|
+Liquid Delivery- offers flow control of one liquid
+Dual Liquid Delivery- separate inlets, liquid flow controllers, and outlets of two distinct liquids
+Liquid Blending Module- two independent flow controlled liquid streams are mixed before exiting the module
+Extended Range Module- contains both a high flow and a low flow liquid flow controller which allows for a turndown ratio of up to 1000 to 1 in a single module
|
|
Specifications
|
|
Specifications of the Liquid Delivery Modules
|
|
|
Liquid Control: |
Mass flow control, peristaltic metering pump, positive displacement diaphragm, or piston metering pumps |
|
|
Liquid Inlet Valves: |
Solenoid valve or pneumatically operated bubble tight valve |
|
|
Maximum Inlet Liquid Pressure: |
125 PSI (8.62 Bar) |
|
|
Mass Flow Controller Brands: |
All digitally controlled brands available including Alicat, Bronkhorst, Brooks, or Sierra |
|
Electrical Requirements
|
|
|
Voltage: |
26-50VDC |
|
|
Communication: |
Ethernet (DHCP) |
|
Front Panel Controls and Displays
|
|
|
Unit Status: |
LCD with backlight, flow setpoint, and actual flow |
|
|
Communications: |
Tx, Rx, Ident LEDs |
|
|
Inlet Pressure Status: |
LED illuminates above threshold pressure |
|
|
Enabled/Standby Status: |
Enabled LED |
|
|
Supply Pressure Gauge: |
1 1/2" (optional) |
|
Back Panel Connections
|
|
|
Power / Run/Standby |
Molex 39660-1004 |
|
|
Communications: |
RJ45 (8P8C) Ethernet |
|
|
Supply Connection: |
Swagelok bulkhead union or optional quick-connect. 1/4" on 1U modules, 1/4" or 3/8" on 2U modules, 1/2" or 3/4" on 3U modules. VCR on optional UHP (Ultra-High Purity) models |
|
|
Outlet Connection: |
Swagelok bulkhead union or optional quick-connect. 1/4" on 1U modules, 1/4" or 3/8" on 2U modules, 1/2" or 3/4" on 3U modules. VCR on optional UHP models |
|
Physical Characteristics
|
|
|
Dimensions: |
1U Modules: 1.75", 2U Modules: 3.5", 3U Modules: 5.25"
19" rackmount; 21" deep |
|
|
System Weight: |
Dependent on configuration, approximately 15 lbs for 1U |
|
|
Operating Environment: |
40 to 100 degrees Fahrenheit, 85% RH |
|
|
Cabinet Rating: |
Indoors |
|
|
Clearance for Operation: |
Back: 6", Sides: 0", Top: 0" |
|
|
Optional UHP Module Materials and Finish: |
316L (VAR if a welded component). Surface finish 10 micro-inch Ra |
|
|
|
|
|
|
News:
Fideris Brand Testing Equipment is Now Available Through the Fuel Cell Store Website
. The Fuel Cell Store is now a distributor for the Fideris Brand of testing and laboratory automation equipment. This Partnership is the first to offer the industry component selection with on-line pricing, allowing customers to tailor their equipment to match their requirements; creating a plug-and-play, turn-key fuel cell test system.
|
|
|
|
|
|
|
|
|
|
|
|