| |
| |
|
|
|
Location: Home / Typical PEM Fuel Cell Test Systems |
|
|
|
|
Typical Turn-Key, PEM Fuel Cell Test Systems Utilizing the Fideris Innovator Series Modules
|
|
Basic Dual Channel 250W PEM Fuel Cell Test Station with Self-Humidified Fuel Cell
|
|
One Dual channel 250W Low Impedance Electronic Load each with 10-ch Cell voltage monitoring
Two Fuel Delivery Modules with Purge
One Dual-Channel Oxidant Delivery Modules
|
|
Single Channel 250W PEM Fuel Cell Test Stand with Reactant Gas Humidification and Extended Gas Range
|
|
One 250W Low Impedance Electronic Load w/10-ch cell voltage monitoring
Module with Extended Range
One Oxidant
One Fuel Delivery Module with Purge
One Fuel Delivery module with Extended Range
|
|
|
Single Channel 1000W PEM Fuel Cell Test Station with Reactant Gas Humidification and Extended Gas Range and Simulated Reformate Blending
|
|
One 1000W Low Impedance Electronic Load
One CO Delivery Module with Purge
One dual Channel Delivery Module with N2 and CO2
One H2 Delivery Module with Extended Range
One Oxidant Delivery Modules with Extended Range
Two Water Metering Channels with Extended Range (humidification)
Dual flash evaporator
Temperature and flow control thermal management unit (1kW heating capacity and 2kW cooling capacity)
Four channel pressure input module
Forty Channel Cell voltage monitoring
Ten channel auxiliary temperature input monitoring
|
 |
Single Channel 10,000W PEM Fuel Cell Test Stand with Reactant Gas Humidification and Extended Gas Range and Simulated Reformate Blending
|
|
One 12kW Impedance Electronic Load
One H2 Delivery Module with Purge
One N2 Delivery Module with Extended Range
One CO2 Delivery Module with Extended Range
Two H2 Delivery Modules with Extended Range
Two Oxidant Delivery Modules with Extended Range
Two Water Metering Channels with Extended Range (humidification)
Dual flash evaporator
Temperature and flow control thermal management unit (10kW heating capacity and 20kW cooling capacity)
Coolant conductivity measuring and continuious polishing station
Four channel pressure input module
Forty Channel Cell voltage monitoring
Ten channel auxiliary temperature input monitoring
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Copyright ©2012 Fideris Brand Test and Automation Equipment |
|
|
home
| contact
| support
| sales
| faqs
products
| company information
| site map
Tes Sol, Inc. | 1315 SE Grace Ave, Ste 130 | Battle Ground, WA 98604 USA
Phone: (360) 687-1393, Fax: (360) 687-8251
Need
help? Contact
our webmaster.